2022-06-06
Everlux will be exhibiting at NFPA Conference & Expo

The Boston Convention and Exhibition Center will hold this year’s edition of the NFPA Conference & Expo and Everlux will be there, next week, from the 6th to the 8th of June.

Everlux is dedicated to expanding its network in the United States, offering high-quality photoluminescent safety signage products that are compliant with the applicable standards, codes and legislation and will be the ideal solution for a highly diversified number of safety marking applications.

The exhibit hall will be open on June 6th, 7th and 8th, and we would like to invite you to visit the Everlux booth – number 253 – where our team will be delighted to welcome you and to discuss the benefits of using the Everlux photoluminescent safety signs. The highlights at the Everlux booth will be:

  • Photoluminescent Fire Safety Signs
  • Photoluminescent Evacuation Plans
  • UL 924 Listed Photoluminescent Exit Signs
  • UL 1994 Listed Egress Path Markings
  • Everlux-AL Photoluminescent Safety Signs for Tunnels
  • Excellence by Everlux – Safety Signs for Luxury Interiors

The Everlux team is looking forward to meet you next week!

2022-03-07
Everlux will attend the NAFED Conference & Expo in Las Vegas
Everlux will be, once again, participating at the NAFED Conference & Expo! The Las Vegas event will take place at the Bally’s Hotel, on the 10th and 11th of March.
2022-03-07
Everlux will attend the NAFED Conference & Expo in Las Vegas

Everlux will be, once again, participating at the NAFED Conference & Expo! The Las Vegas event will take place at the Bally’s Hotel, on the 10th and 11th of March.

We are looking forward to meeting the fire equipment distributors and to re-connect. The exhibit hall will happen on March 10th where we will be displaying the Everlux photoluminescent safety signage solutions.

The Everlux booth is number 133, where you can learn more about our products and news, such as:

- Photoluminescent Fire Safety Signs

- UL 924 Listed Photoluminescent Exit Signs

- UL 1994 Listed Egress Path Marking Systems

- Excellence by Everlux

- The Everlux Exhibition – an interactive experience!

We look forward to meeting you again in just a few days!
2021-09-22
Fire Safety Signs for Elevators
In case of fire, most elevators are not to be used in the evacuation process.
2021-09-22
Fire Safety Signs for Elevators

In case of fire, most elevators are not to be used in the evacuation process. In these cases, an instruction not to use elevators shall be posted near elevator call buttons. The safety symbols used in such instructions are specified by NFPA 170 – Standard for Fire Safety and Emergency Symbols.

There are, however, elevators that are integrated in Elevator Evacuation Systems which are used in the evacuation process. The components of these systems, such as elevator lobbies, elevator doors, shafts and machine rooms are protected from fire and can safely be used for egress. NFPA 101 – Life Safety Code mandates the use of specific signs in the lobbies of elevators that are part of the means of egress indicating tat the elevator can be used for evacuation as all as their operational status.

2021-08-17
Door Opening Hardware Signs
The International Building Code (IBC) requires the use of approved luminous Egress Path Markings in high-rise buildings
2021-08-17
Door Opening Hardware Signs

In its CHAPTER 10 – MEANS OF EGRESS, SECTION 1025, LUMINOUS EGRESS PATH MARKINGS, the International Building Code (IBC) requires the use of approved luminous Egress Path Markings in high-rise buildings of Group A, B, E, I, M, and R-1 occupancies in accordance with Sections 1025.1 through 1025.5.

An egress path marking system contains many different components each of them having its specific purpose. The floor and wall perimeter delineation stripes maybe be the most important component to mark the exit path but in emergency situations, door opening hardware signs provide just as essential guidance on where and how to open exit doors.

As per IBC, door hardware shall be marked with a photoluminescent marking with at least 16 square inches. This marking shall be located behind, adjacent to or on the door handle or escutcheon. Panic bars shall be marked with at least 1” wide photoluminescent marking in the complete length of the actuating bar or touchpad.

NFPA 101 Life Safety Code further enforces this requirement in paragraph 7.2.2.5.5.7 Door hardware Marking.





Everlux provides a comprehensive selection of door opening hardware signs and markings as part of its UL 1994 Listed Egress Path Markings range. Learn more in our digital catalogue.

 

2021-08-10
ANSI Compliant Safety Signs
ANSI Z535 is an American standard that sets forth the design principles for safety and accident prevention signs.
2021-08-10
ANSI Compliant Safety Signs

ANSI Z535 is an American standard that sets forth the design principles for safety and accident prevention signs. The standard is composed by six individual standards:

  • ANSI Z535.1 – Safety Colors
  • ANSI Z535.2 – Environmental Facility and Safety Signs
  • ANSI Z535.3 – Criteria for Safety Symbols
  • ANSI Z535.4 – Product Safety Signs and Labels
  • ANSI Z535.5 – Safety Tags and Barricade Tapes (for Temporary Hazards)
  • ANSI Z535.6 – Product Safety Information in Product Manuals, Instructions, and Other Collateral Materials

The Everlux catalogue contains a growing number of ANSI compliant safety signs that will help you comply with the Safety and Health Adminitration requirements applicable to your workplace.







To browse through the available Everlux ANSI compliant safety signs visit our website.

next page